ps-0082 rev. 01 page 1 of 9 document no. : ps-0082 revision : 01 revised date : 04-aug-2010 issued date : 04-aug-2010 electronic solutions division 6801 river place blvd austin, tx 78726 http://www.3mconnector.com 3m tm high routability internal mi nisas cable assembly, series 8F36 3m high routability internal minisas cable assembly, series 8F36 product specification
ps-0082 rev. 01 page 2 of 9 document no. : ps-0082 revision : 01 revised date : 04-aug-2010 issued date : 04-aug-2010 electronic solutions division 6801 river place blvd austin, tx 78726 http://www.3mconnector.com 3m tm high routability internal mi nisas cable assembly, series 8F36 table of contents section content page cover page 1 contents 2 1. scope 3 1.1. content 3 2. applicable documents 3 2.1. commercial standards, specifications and report 3 3. requirements 3 3.1. design and construction 3 3.2. materials 3 3.3. ratings 4 3.4. performance and test description 4 3.5. test requirements and procedures summary 5
ps-0082 rev. 01 page 3 of 9 document no. : ps-0082 revision : 01 revised date : 04-aug-2010 issued date : 04-aug-2010 electronic solutions division 6801 river place blvd austin, tx 78726 http://www.3mconnector.com 3m tm high routability internal mi nisas cable assembly, series 8F36 1. scope 1.1. content this specification covers performance, tests and quality requirements for the 3m high-routability minisas cable assemblies, series 8F36. 2. applicable documents the following documents form a part of this specification to the extent specified herein. unless otherwise specified, latest edition of the specification applies. in the event of conflict between requirements of this specification and product drawing, product drawing shall take precedence. 2.1. commercial standards, specifications and report 2.1.1. eia-364 2.1.2. sas2 2.1.3. sff-8086 2.1.4. sff-8087 3. requirements 3.1. design and construction product shall be of design, construction and physical dimensions specified on applicable product drawing. 3.2. materials 3.2.1. plug overmold material: high temperature thermoplastic flammability: ul94v-0 3.2.2. paddlecard material: fr4 mating pad underplating: min 100u? ni mating pad finish: min 30u? au 3.2.3. high-speed ribbon twin ax cable see related specification ps-0079 for ribbon twin ax cable material information
ps-0082 rev. 01 page 4 of 9 document no. : ps-0082 revision : 01 revised date : 04-aug-2010 issued date : 04-aug-2010 electronic solutions division 6801 river place blvd austin, tx 78726 http://www.3mconnector.com 3m tm high routability internal mi nisas cable assembly, series 8F36 3.3. ratings 3.3.1. current rating: 0.5 a/contact 3.3.2. operating temperature: -20 to +80 deg c 3.4. performance and test description product is designed to meet electrical, mechanical and environmental performance requirements specified in section 3.5. all tests are performed at ambient environmental conditions per eia-364 unless otherwise specified. the mated boardmount connector us ed in these tests was the 3m minisas internal right-angle connector, series 8ab36 (found on tech sheet ts-2208). 3.5. test requirements and procedures summary
ps-0082 rev. 01 page 5 of 9 document no. : ps-0082 revision : 01 revised date : 04-aug-2010 issued date : 04-aug-2010 electronic solutions division 6801 river place blvd austin, tx 78726 http://www.3mconnector.com 3m tm high routability internal mi nisas cable assembly, series 8F36 test description test condition requirement electrical withstanding voltage 300 v dc applied for 1 minute between adjacent signal wires, between signal wire and shield, and between sideband and shield per eia-364-20 no breakdown; current leakage < 1 ma insulation resistance 100v applied for 1 minute between adjacent signal wires, between signal wire and shield, and between sideband and shield per eia-364-21 < 1000 megohms propagation delay measured with 3 meter sample per sff-8416 sect 8.2.7.3 4.95 ns/m (typical) intrapair skew (within pair) measured with tdr method using 3 meter samples. risetime of 40 ps (10-90%). skew measured at 70 ohm crossing point.. < 10 ps/meter
ps-0082 rev. 01 page 6 of 9 document no. : ps-0082 revision : 01 revised date : 04-aug-2010 issued date : 04-aug-2010 electronic solutions division 6801 river place blvd austin, tx 78726 http://www.3mconnector.com 3m tm high routability internal mi nisas cable assembly, series 8F36 signal integrity impedance, mated cable assembly risetime of 70 ps (20/80%) 100 +/- 10 ohms differential insertion loss, sdd21 1 meter assembly measured over frequency range 50 mhz to 4.5 ghz meets sas2 limit line: -6db up to 4.5 ghz differential reflection loss, sdd22 half and one meter assemblies measured from 50 mhz to 6 ghz meets sas2 limit line: < -10 db up to 2.075 ghz < -7.9+13.3 x log( f / 3 ghz) between 2.075 and 6 ghz differential-to-common mode conversion, scd21 half and one meter assemblies measured from 50 mhz to 6 ghz meets sas2.1 limit line: < -18 db up to 6 ghz differential to common mode reflection, scd22 half and one meter assemblies measured from 50 mhz to 6 ghz meets sas2 limit line: < -26 db up to 300 mhz < -12.7+13.3 x log( f / 3 ghz) between 300 mhz and 6 ghz < -10 db between 4.8 and 6 ghz near end crosstalk half and one meter assemblies measured from 50 mhz to 6 ghz . total next calculated as described in table 52 of sas2 standard (rev 16) meets sas2 limit line: < -26 db up to 6 ghz
ps-0082 rev. 01 page 7 of 9 document no. : ps-0082 revision : 01 revised date : 04-aug-2010 issued date : 04-aug-2010 electronic solutions division 6801 river place blvd austin, tx 78726 http://www.3mconnector.com 3m tm high routability internal mi nisas cable assembly, series 8F36 mechanical static (one-time) fold bend radius: 1.0 mm bend types: 45 , 90 , 180 (flat fold) meets signal integrity specifications (impedance, s- parameters) after a one- time 1 mm minimum bend radius fold critical dimension measurement measure dimensions specified in applicable product drawing. product shall meet requirements of applicable product drawing. durability 250 cycles measured according to eia-364- 09 maximum initial r of 80 milliohms and maximum delta r of 20 milliohms mechanical shock mated connectors tested according to eia-364-27, test condition ?h?. normal duration 11 ms, 30g peak acceleration, ? sine wave, 3 times each in +/- x, y, & z (18 shocks total) no physical abnormalities after test. no electrical discontinuity > 1 us. maximum initial r of 80 milliohms and maximum delta r of 20 milliohms random vibration mated connectors tested according to eia-364-28, test condition vii, letter d. frequency 20 ? 500 hz, 3.10 g rms, 15 min duration maximum initial r of 80 milliohms and maximum delta r of 20 milliohms removal force measured according to eia-364- 13 49 n maximum insertion force measured according to eia-364- 13 55.5 n maximum
ps-0082 rev. 01 page 8 of 9 document no. : ps-0082 revision : 01 revised date : 04-aug-2010 issued date : 04-aug-2010 electronic solutions division 6801 river place blvd austin, tx 78726 http://www.3mconnector.com 3m tm high routability internal mi nisas cable assembly, series 8F36 environmental aging (flat) 70 c for 500 hours per eia-364- 17 method ii, test condition a no visual changes and meets signal integrity specifications (impedance, s- parameters). maximum initial r of 80 milliohms and maximum delta r of 20 milliohms aging (folded) 85 c for 1000 hours per eia-364- 17 method a condition 2 with 1 mm radius 180 fold. no visual changes and meets signal integrity specifications (impedance, s- parameters). maximum initial r of 80 milliohms and maximum delta r of 20 milliohms humidity 10 cycles (10 days) between 25 c and 65 c at 80% to 100% rh, per eia-364-31, table 1, test condition b, method iii, figure 1. no bias and no sub-cycle. no visual changes and meets signal integrity specifications (impedance, s- parameters). maximum initial r of 80 milliohms and maximum delta r of 20 milliohms thermal shock -55 c to +85 c, 10 cycles, 1/2 hour at each temperature extreme , per eia-364-32, table 2, test condition i no visual changes and meets signal integrity specifications (impedance, s- parameters). maximum initial r of 80 milliohms and maximum delta r of 20 milliohms
ps-0082 rev. 01 page 9 of 9 document no. : ps-0082 revision : 01 revised date : 04-aug-2010 issued date : 04-aug-2010 electronic solutions division 6801 river place blvd austin, tx 78726 http://www.3mconnector.com 3m tm high routability internal mi nisas cable assembly, series 8F36 3m is a trademark of 3m company. warranty; limited remedy; limited liability 3m?s product warranty is for one (1) year from the date of manufacture. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3m?s option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any loss or damage arising from this 3m product, whether direct, indirect, special, incidental or consequential regardless of the legal important notice before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use.
|
